Navigation
GARAGE DOOR CAN BE CONTROLLED
Alarm system JABLOTRON 100+ enables using a pass-through socket with a PG outlet to control the garage door with an emphasis on speed and ease of installation.
REQUIRED EQUIPMENT
JA-1xxE with free segment
JB-163N-PLUG
JA-11xR
JA-154J MS II
WIRING INSTRUCTIONS
Wiring requires knowledge of the manuals of all components used. All current documents for JABLOTRON components can be found on MySTORAGE.
Each garage door motor has connectors in a different place and under a different designation, for this reason it is necessary to read the manual of the motor or contact the manufacturer.
Fig.1. Connection of the wireless plug to the ceiling wiring and power supply of the motor.
SETTING UP AND PROGRAMMING THE SYSTEM
In the F-Link set the PG logic setting based on garage motor manual, usually pulse for 1 second.
1. PG logic settings. Name the PG output, set the logic to NO, set the function as Impulse and time to 1 second.
2. JB-162N-PLUG / JB-163N-PLUG wireless plug setting
3. JA-154J MS II key fob settings. Any Key fob compatible with JABLOTRON 100+ system can be used.
4. Setting the segment to control the drive from the keypad.
LOCAL AND REMOTE CONTROL
The garage door can be controlled locally by a keypad segment or in case of emergency by a button directly on the wireless plug. For remote control the MyJABLOTRON app or Key fob can be used. If there is a SIM card in the control panel, the door can also be controlled by SMS or ringing. (Details of this setting can be found in the control panel manual).
